Recently there was a power outage where I live. Although I have many backup light sources I wanted to refer to my Slush Lamp Basics as an alternative light source. Although there are many possibilities such as
Emergency Fuels From Your Car, I wanted to use a more conventional fuel so I chose some canola oil from my kitchen.
I have found that natural fibers work best when choosing a wick, and that a ribbon or tape shape rather than a round shape provides a better light source.
In our medicine cabinet I found a 100% ribbed cotton pad so I cut off a rib to use for my wick. I poured a small amount of canola oil into a small Pyrex dish as my vessel. I tore off a small piece of aluminum foil and poked a hole in the middle. I dipped the wick into the canola oil then inserted it through the hole leaving about a quarter inch on top then placed the foil over the top of the oil. A soaked wick is slow to light but once lit displays a steady flame.
The foil provides a convenient barrier between the oil and flame while suspending the wick in the middle of the dish. An added bonus is that the crinkled foil texture reflects and enhances the light from the flame.
This simple design can provide hours of light when needed. Be sure to keep it away from combustibles and make sure that it is stable as the oil is a liquid and could spill.
Leave a Comment